Kobold MIM
Compact stainless steel flowmeter for liquids
Category Electromagnetic flowmeters
Etikett Kobold Messring
Description
Technical specification
Manufacturer
PDF
Description
MIM electromagnetic flowmeter was developed for measuring and monitoring small and medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle.
According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow.
The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier. The flow rate will be calculated based on the cross sectional area of the pipe. The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature.
Two given outputs can be set to be switch, analogue or frequency. Also a dosing function can be selected, where output 1 is set as switch NPN / PNP / PP and output 2 is set as control input.
Technical specification
MODEL | MIM |
MEASURING RANGE | 0.01…1 l/min..3…650l/min |
CONNECTION | G ¼, G ½, G ¾, G 1, G 2, 2″ NPT |
MATERIAL | Stainless steel |
MAX PRESSURE | 16 Bar |
MAX TEMPERATURE | +70°C, remote (140°C) |
ACCURACY | 0.8% av läst värde + 0.5% av full skala |
OUTPUT | 4…20mA, 0…10Vdc, pulse, IO-Link |
Manufacturer
PDF
Quote form
Not sure what you need? We will help you, fill out the form below.
Related products
-
KOBOLD KSV
Variable area flowmeter for low flows
-
ModMAG M1000
DN6-DN500, MID
-
ModMAG M2000
Wide size range DN6-DN2000, MID
-
Heinrichs EPS
EPS with high accuracy and versatile connectivity