Description
Technical specification
Manufacturer
PDF
Description
Refrigeration dryers are among the dryers in compressed air treatment most commonly used. If the required drying is not achieved, the impact of wet air can be serious: Rust in the pipes, failures of machines , and a negative impact on product quality. SUTO offers with the S305 a measuring device for dew point monitoring that kicks in alarm indications when drying values are not within the desired range.
The All-In-One dew point monitor serves as a measuring and display device. The connection to the compressed air network is via a 6 mm quick-connector and corresponding connecting hose. The entire measuring unit is integrated together with the display in a rugged housing (IP 65) and is available both as a panel variant or as a wall-mounted housing. Two alarm levels can be programmed (pre and main alarm), serving an optical indications or separate relay outputs. The dew point meter allows a simple and inexpensive dew point monitoring
Technical specification
MODEL | MODEL S305 |
MATERIAL | ABS, Aluminum alloy |
DEW POINT | -60 … +20 ºC Td (beroende på modell) eller -20 … +50 ºC Td (beroende på modell) |
TEMPERATURE | -10 ... +40 °C |
ACCURACY | ± 2 °C Td |
PRESSURE AREA | 0.3 ... 1.5 MPa |
CONNECTIONS | SS 1.4301 (SUS 304) |
POWER SUPPLY | 100 ... 240 VAC ; 50/60 Hz (depending on model) or 24 VDC (depending on model) |
OUTPUT | 4-20 mA |
PROTECTION CLASSES | IP65 |
MANUFACTURER | SUTO Itec |
Manufacturer
PDF
Quote form
Not sure what you need? We will help you, fill out the form below.
Related products
-
SUTO S451
Thermal insertion mass flow meter for compressed air and gas measurement, ATEX
-
SUTO S230/S231
Ex-class -100 … +20 ºC Td, -50…+20 °C Td
-
SUTO S220
Dew point sensor, -100…+20°C
-
SUTO S215
Dew point sensors, -20…+50ºC Td